Viking SRS (Surface Rescue Suit)

Category:

Product Description

– Lightweight flexible materials
– External stitched seams
– “Vulca Seam technology” ensures watertight seams for the life of the suit
– Helps to protect the wearer from water borne biological contaminants
– Easy to clean biological contamination from surface
– Front entry adjustable torso for ease of operational comfort

FABRIC
Two material options are available as follows:
– 450 g/m2 Cordura textured outer / Butyl midply / Polyester inner. Light and strong. Good puncture and abrasion resistance.
– 350 g/m2 Nylon outer / Butyl midply / Nylon inner. Lighter and more flexible than Cordura. Equally good puncture and abrasion resistance. Smooth close knit exterior surface.

COLOUR
Cordura and Nylon: Black legs with black top, Black legs with yellow top, Black legs with red top
SOLAS reflectors are fitted as standards to the front and back of wrists, upper arms and backs of legs for visibility

SEAMS
External seams stitched together. Internal seams are chemically treated and then an uncured rubber tape is applied to the seams using heat and pressure. Finally the suit is placed inside a vulcaniser whereby the rubber tape becomes cured into the material surface. This is known as “Vulca Seam technology”.

REINFORCEMENTS
VTS material is inherently abrasion and puncture resistant. Shaped “Superfabric” knee pads featuring flexible cut and abrasion resistant guard plates are fitted to the legs above and below the knees. Drain holes are also fitted to the pads.

STANDARDS
PPE Directive 89/686/EEC, using applicable parts of EN 15027-1:2002

ZIPPER
MED duty non mag zipper, 85 cm or 90 cm length dependent on suit size.
Zipper flap fitted as standard.
OPTION: Relief zipper may be fitted.

BOOTS
Rubber coated 5 mm neoprene boots with a fin retainer are fitted as standard.
OPTIONS include nitrile safety boots, PVC wellies, latex socks or VSN material socks if the suits are to be used with overboots.

NECKSEAL
The Viking SRS is fitted with a Surveyor latex neck seal as standard.
OPTIONS: Bellows latex neck seal, neoprene neck seal, quick connect collar system which allows for quick changing of broken seals. A neoprene neck warmer may be paired with a latex neck seal.

HOOD OPTIONS
Viking SRS suits may be fitted with a wide range of hood options as follows: Surveyor latex hood + thermal inner hood, Nautic neoprene hood with smooth face seal, Smoothskin hood.
If the suit has been fitted with a Quick Connect collar system, then specific latex and neoprene hoods are available for fitting.

CUFFS
Latex conical cuffs are standard.
CUFF OPTIONS: PRO latex cuffs or bellows latex cuffs
GLOVE RING OPTIONS: In order to make the suit completely waterproof, it is possible to fit a rubber cuff ring system with fixed external rubber ring, and loose stiff plastic ring which holds the latex seal in place. The alternative is a plastic bayonet glove ring system with a plastic ring mounted on the sleeve, and a replaceable cuff held in place with a plastic ring.

Both systems then make the fitment of latex gloves possible.

INCLUDED WITH EACH DELIVERY
Each suit comes supplied as standard with the following items:
Suspenders, carry bag, user manual, repair kit and zip care materials.

CORDURA / BUTYL / POLYESTER 450 G/M2

Property Result Standard
Thickness 0.80 mm
Weight 450 g/m2 ISO 3801
Tensile Strength Warp: 2200 N / Weft: 1400 N ISO 1421
Tear Strength Warp: 200 N / Weft: 200 N ISO 4674
Puncture Resistance 128 N pr EN 863
Abrasion Resistance After 5,000 cycles, weight loss 27 gms ISO 5470-1 H18, 250 g

NYLON / BUTYL / NYLON 350 G/M2

Property Result Standard
Thickness 0.47 mm
Weight 350 g/m2 ISO 3801
Tensile Strength Warp: 1500 N / Weft: 1500 N ISO 1421
Tear Strength Warp: 150 N / Weft: 150 N ISO 4674
Puncture Resistance 128 N pr EN 863
Abrasion Resistance After 5,000 cycles, weight loss 15 gms ISO 5470-1 H18, 250 g

Viking MEASURING GUIDE

Part # srs

Free!

SKU: srs Category: . Tags: .,