Grinder, CE, 9 in Capacity

ST GR2931001

The Stanley Hydraulics Underwater Grinder GR29 is used by commercial divers for top, face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire brushes can also be used and depressed-center wheels with an optional adapter. This hydraulic underwater tool can be used by commercial divers to clean off barnacles or coral off of the bottom of the ships.

The CE version of the Stanley Underwater Hydraulic Grinder P/N: ST GR2931001 comes with quick disconnect couplers but hose whips are sold separately. Hose whips and quick disconnect couplers are sold separately for the Stanley Hydraulics Underwater Grinder part number ST GR29310.

Stanley's Underwater Hydraulic Grinder GR29 can be used by commercial divers for underwater grinding and cleaning with either cup or standard grinding wheels, wire or nylon brushes. Grinding wheels are sold separately.

The integral Stanley Hyrevz gear motor is manufactured to exacting standards to deliver maximum efficiency for the Stanley Hydraulics Underwater Grinder GR29. The plastisol covering the handle transmits very little heat. The plastisol gives a more comfortable grip to the Stanley Hydraulic Underwater GR29. There are two positions available for the assist handle to be conveniently placed by the commercial diver. Either position is at a most comfortable handling position from the valve handle.

The wheel guard is adjustable. By loosening the clamp screw the guard may be rotated to any convenient position by the commercial diver.

— Adjustable wheel guard
— 4-10 gpm (15-38 lpm) operating range at the commercial diver end
— 2700 rpm @ 10 gpm (38 lpm)
— Grinding wheels are sold separately
— Hose whips are sold separately for the CE version. For hose whips, purchase P/N ST 01652.

Capacity — 9 in wheel on 5/8 in -11 Arbor
RPM: — 2700 @ 10 gpm (2700 @ 38 lpm)
Pressure — 1000-2500 psi (70-176 bar)
Flow Range — 4-10 gpm (15-38 lpm)
Optimum Flow — 10 gpm (38 lpm)
Weight (with guard) — 14 lbs (6.4 kg)
Length — 11 in (28 cm)
Width (with guard) — 12 in (30.5 cm)
Porting — 8 SAE O-Ring
Hose Whips — No
Motor — Hyrevz™ gear

GR29 User Manual

Get the latest news

Keep up to date with the latest events from Deca Diving