Viking HWS MK 2 (Hot Water Suit)

Category:

Product Description

– Flexible material and pattern layout
– Abrasion resistant RO-TEX™ nylon exterior
– PU coating for ease of cleaning
– Glued and stitched seams, with front seams coated for protection
– PU reinforcements on knees and elbows
– New “click” function valve with 3 flow settings and a dump mode

FABRIC
Suit construction: 5 mm neoprene
Suit exterior: RO-TEX™ nylon with a PU top coating
This creates a very abrasion resistant exterior which can also be cleaned down after diving.

Underarm panels are constructed from 3 mm material for maximum freedom of movement.  The 2 front mounted pockets are also manufactured from the 3 mm material.

COLOR
Black with contrasting grey stitching.

SEAMS
Seams are double glued, and then stitched using a heavy grade polyester thread. The seam that runs across the lower torso is additionally coated for protection from abrasion caused by friction and other sharp objects often found in the harsh underwater working environment.

REINFORCEMENTS
PU reinforcements are added to the elbows and the knees.

STANDARDS
VIKING™ HWS MK 2 is CE marked, after evaluation according to the necessary paragraphs of EN 14225-3:2005

HOT WATER VALVE AND WATER FLOW

The VIKING™ HWS MK 2 features an internal diamond profile rubber tubing covered with a layer of neoprene for comfort. Strategically placed holes are drilled into the tubing, and hot water is pumped down from the surface, and dispersed around the inside of the suit through these holes. The water temperature is controlled from the surface via instructions from the diver.

Narrow gauge neoprene tubing is placed at the wrists and the ankles to allow water to flow into the optional hot water gauntlet gloves and hot water boots.

The new hot water valve, designed specifically for VIKING™, has a unique “click” function, with 3 flow settings and a dump mode. The flow settings are HIGH, MED & LOW, and represent flow rates of approximately 49 litres/min, 44 litres/min and 36 litres/min. The inlet valve is a standard banjo fitting, which attaches to a QD ½” male fitting which is attached to the water supply hose. The valve is mounted on the right hip and is easy to access.

CAUTIONARY ADVICE

Hot Water Suits must be used in conjunction with an undergarment to protect the diver from accidental burning or scalding from excessively heated water. Typical undergarments would be neoprene suits or thermal undersuits.

POCKETS

2 front mounted 3 mm neoprene pockets with RO-TEX™ nylon exterior and PU coating for high abrasion resistance.

4 eyelets are built into each pocket for the attachment of accessories.

GLOVES AND BOOTS

Optional 5 mm neoprene gauntlet gloves with reinforced palms and Velcro attachment points.

Sizes: Medium (MED), Large (LGE) and X-Large (EXL)

Optional 5 mm neoprene boots with a rubber outsole and Velcro attachments.

Sizes: Medium (MED), Large (LGE) and X-Large (EXL)

INCLUDED WITH EACH DELIVERY

Each VIKING™ HWS MK 2 suit is supplied with a nylon carry bag and a user manual.

Viking_HWS_MK2

Size_Chart_Viking_HWS_MK2

Viking_HWS_MK2_EC Cert

Viking Hot Water Gloves
Viking Hot Water Boots

Part # N/A
VIKING_HWS_MK_2_pockets_and_knee_reinf_closeup_LOWVIKING_HWS_MK_2_elbow_reinf_closeup_LOW

Login For Pricing

  • Type of DiveSuit: Drysuit
  • Dive Gender: Female, Male
  • Dive Suit Brand: Viking
  • Dive Suit Color: Black
SKU: N/A Category: . Tags: .,