Pro CO Low Pressure / High Temp Analyzer


Product Description

The Pro COTM Carbon Monoxide Analyzer with low pressure and high temperature alarms measures carbon monoxide (CO) levels in gases in the range of 0 to 100 parts per million (ppm). It can be used to measure the CO content in gas mixes that may be contaminated due to the introduction of CO from internal combustion engines or other devices where CO is a byproduct. This unit is designed to verify CO concentration in continuous air flow from an operating compressor. In Addition, the unit includes a High Temperature Alarm that will activate if the compressor’s air outlet reaches 350°F, and a Low Pressure alarm that will activate if the air pressure supplied to the unit drops below a set value (factory set at 100 PSI). The Analyzer is battery powered and includes an LCD display, red alarm light, Piezzo alarm and hinged clear water-resistant case. The Analyzer uses a Flow Meter/Regulator to deliver sample gas to the Sensor.
*Includes CO sensor Cell
Range: 0-100ppm Carbon Monoxide
Display Accuracy: +/- 1% at Constant Temperature and Pressure
Sensor Type: Electrochemical (p/n NU 9501-50)
Power: Lithium Rechargeable Battery
Alarms: Audible and Visual
Response Time: less than 50 seconds to 90% value
Operating Temperature: 41 to 104 Degrees F (5 to 40 Degrees C) will work outside this range with decreased accuracy
Storage Temperature: 14 to 140 Degrees F (-10 to 60 Degrees C)
Operating Humidity: 15 to 90% RH, Non-Condensing
Warranty: 12 Months
* All specifications are at ambient/sea level, 77 Degrees F (25 Degrees C)
* Pressure switch factory set @ 90 psi (other settings available)
Pro CO Alarms

Part # Product
NU P101613 Test gas: 10 ppm CO
NU 400-100 Regulator for test gas
NU 9501 Replacement CO Cell
Part # NU 9621-LB

Login For Pricing

SKU: NU 9621-LB Category: .