Over 30 years in business
KM 37
Filters
Bailout QD Whip, 42", Single Shut-Off, Brass
Deca DivingThe Quick Disconnect Hose Whip is designed to be used between your First Stage Regulator and your helmet or mask allowing the bail-out system to be...
View full detailsHelmet Pad for Bench/Bag/Case
Deca DivingThis non-conductive, self-extinguishing 1″ thick closed-cell Nitrile foam cushion helps protect your helmet. Great for using as a bench pad or insi...
View full detailsBailout QD Whip, Double Shut-Off, Brass
Deca DivingThe Quick Disconnect Hose Whip is designed to be used between your First Stage Regulator and your helmet or mask allowing the bail-out system to be...
View full detailsQD Whip, 42″, Double Shut-Off, Stainless Steel
Deca DivingThe Quick Disconnect Hose Whip is designed to be used between your First Stage Regulator and your helmet or mask allowing the bail-out system to be...
View full detailsWeld Lens Kit
Kirby MorganThis Welding Lens Assembly will fit all models, Kirby Morgan helmets and Bandmasks. The port retainers are supplied with two plug screws which are ...
View full detailsKM Over Pressure Relief Valve, Hi-Flow
Kirby MorganThe Kirby Morgan overpressure Relief Valve is factory adjusted to vent any time the pressure in the low pressure hose connecting the bailout bottle...
View full detailsRestrictor Adapter
Kirby MorganThe restrictor adapter should be used when an inflation hose is attached to the side block when dry suit diving. The main purpose of the restrictor...
View full detailsAnode Kit for SL 17K, 27, KM 37, 47, and 57
Kirby MorganDSI 525-374 Anode Kit
Kirby Morgan Maintenance & Repair Log Book
Kirby MorganThe Kirby Morgan log book has been developed to work with the long standing operational/maintenance checklists, procedures, and operations/maintena...
View full detailsHot Water Shroud Kit
Kirby MorganFor SL 17B, 17C, 27, KM 37, 57, and KMB 18/28. Part # Description Qty. 510-597 Side Block Shroud 1 510-598 Corrugated Tube 1 510-599 Reg...
View full detailsKirby Morgan Helmet Bag
Kirby Morgan– Made of heavy duty, black ripstop nylon– Lightweight, white polyethylene foam– Padded bottom for extra protection– 2 grommet ventilation holes to...
View full detailsPull Pin Sleeve Kit
Kirby MorganThis sleeve was created for the DSI 505-110 sealed pull pins. It prevents the knob of the pull pin from snagging or catching on objects or protrusi...
View full detailsWelding Shield Assembly
Kirby MorganThis Welding Shield Assembly will fit all models of Kirby Morgan helmets and the KMB-18A/B, and the KMB-28B Band Masks. The port retainers are supp...
View full detailsKirby Morgan Accessory Bracket
Kirby MorganDSI 525-717 Kirby Morgan Accessory Bracket Accessory bracket kit for the KM 37, 47, 57, and SL-17K. Part # Description Qty. DSI 530-040 Scre...
View full details