Viking

5-finger latex gloves with rolled edge and smooth finish. Supplied with 5 finger cotton inner gloves. Application: To be used with the Viking Rubb...

Applications: The Bellows Latex Seal is available as an option on any VIKING dry suit Features: Latex seal which moves with the diver when bending...

Commercial overboots (harbor boots) are made to be worn over rubber dry suits to protect the diver's feet from sharp objects on the seabed. They al...

The X2 Double Exhaust Valve was developed to meet the increasing safety demands from divers encountering contaminated water during day-to day-opera...

Specifications: Size: .68 oz glass bottle IMPORTANT NOTE: This glue is Department of Transportation (DOT) regulated and requires special packagin...

IMPORTANT NOTE: This glue is Department of Transportation (DOT) regulated and requires special packaging with Hazmat shipping and fees.

Includes: (1) BDM – Zip Care Fluid (1) BDM – Zip Wax with directions (1) Sandpaper (3) Long Rounded rectangular patches (3) Small Circle Patches (...

For Standard Cuff Ring System. 5-finger latex gloves with chemical roughened surface for extra grip. Rolled edge. Supplied with 5-finger cotton inn...

Viking latex HD cuffs are made of a dipped latex construction. Thicker than the PRO cuffs, and built for durability. Extra long for different arm l...

An 8 mm foam laminate hood, manufactured to be used as a thermal liner for Viking Turbo and Magnum vulcanized rubber hoods, and Surveyor latex hood...

These boots are specially designed to attach directly to the Viking Hot Water Suit, and allow for the leg tubing to extend into the boot to keep th...

These gloves are specially designed to attach directly to the Viking MK2 Hot Water Suit, and allow for the arm tubing to extend into the glove to k...

Low pressure hose Length: 29.5 inches Connection: CEJN connector

The Viking push protected inlet valve has a push button slightly lower than the housing which helps prevent accidental inflation by equipment strap...

This product goes with the Viking Commercial Overboots. Lead insoles add stability to the diver when working in moving water. Color: Black plastic ...

This product goes with the Viking Commercial Overboots. Lead insoles add stability to the diver when working in moving water. Color: Yellow plastic...

Viking latex PRO cuffs are made of a dual dipped latex construction. Thicker at the end where they attach to the suit , and thinner at the wrist to...

Specifications: Size: 1 Liter IMPORTANT NOTE: This glue is Department of Transportation (DOT) regulated and requires special packaging with Hazma...

Viking Rubber Patches 30MM - Black (Pack of 10), For Pro / Protech / HD / Haztech Suits

Viking Rubber Patches 45MM - Black (Pack of 10), For Pro / Protech / HD / Haztech Suits

Viking Rubber Patches 75MM - Black (Pack of 10), For Pro / Protech / HD / Haztech Suits

Applications: A rubber yoke which acts as the interface between a suit and the Kirby Morgan Superlite 17A and 17B diving helmets Features: Durab...

Applications: A rubber yoke which acts as the interface between a suit and the Kirby Morgan SL 17C, SL 17K, SL 27, KM 37, KM 47, KM 57, KM 77 and ...

Applications: For Pro / Protech / HD / Haztech / WRS Suits. The cuff ring kit comprises of an outer rubber ring which can be glued to the end of ...