Skip to content
CHECK OUT OUR CLEARANCE ITEMS
CHECK OUT OUR CLEARANCE ITEMS

BR-22 Plus Cutting Torch

by Broco
SKU BR 22-PLUS
Original price $472.50 USD - Original price $472.50 USD
Original price
$472.50 USD
$472.50 USD - $472.50 USD
Current price $472.50 USD

The Broco BR-22 Plus Cutting Torch features21 design improvements, including the removal of all rubber from direct oxygen pathway, a PTFE lined fiberglass reinforced coupler hose, improved flash arrestor with higher oxygen flow rate and better flash back protection, non-return valve to prevent back flow, and improved collet and collet washer design.

Broco's Engineering Technology Group dedicated two years to the design and development of the new torch with diver safety as its top priority. As with the original BR-22, it is also ergonomically designed for diver comfort, and is made with quality materials to deliver years of trouble-free performance at low cost. All Broco rods and electrodes used with the BR-22 also can be used with the new BR-22 Plus.

Features
  • Redesigned collet provides tighter hold on the cutting rod. Redesigned collet washer removes rubber from the oxygen stream and extends washer life.
  • Ceramic washer provides noncombustible electrical isolation.
  • PTFE lined fiberglass reinforced hose withstands extremely high operating temperatures and is combustion resistant.
  • The internal gasket reduces electrolysis, insulates the diver’s hand from electrical current, and reduces potential for gas pockets in the torch.
  • Sintered element slag arrestor withstands more heat and sparks and increases oxygen flow rate.
  • Non-return valve stops the flow of hot gases in the event of a flash back.
  • Valve lever and valve stem have been redesigned to allow manual return should the valve stem get stuck.
  • Redesigned valve to better meter flow.
Accessories
Part # Product
BR UWBR22RCSK Complete Spare Parts Kit for BR-22 PLUS
BR UWBR22A01 Replacement Handle Set w/Screw, Nuts, O-ring
BR UWBR22A03 Torch Head and Cable Assembly
BR UWBR22A04 Collet Nut
BR UWBR22A05 Flash Arrestor
BR UWBR22A06 Check Valve Assembly
BR UWBR22A07 Coupler Hose Assembly
BR UWBR22A08 Control Valve Assembly
BR UWBR22A09 Valve Lever Set w/Screw & Nut
BR UWBR22N014 Dash 014 Neoprene O-ring Collet to Head Seal
BR UWBR22N123 Dash 123 Neoprene O-ring Nut to Handle Seal
BR UWBR22R02K Replacement Handle Set w/Nuts
BR UWBR22ROSK Replacement O-ring Set
BR UWBR22W38 Silicone Rubber Collet Washer for 3/8" Collet
BR UWBR22W14 Silicone Rubber Collet Washer for 1/4" Collet
BR UWBR22W516 Silicone Rubber Collet Washer for 5/16" Collet
BR UWBR22W00 Silicone Rubber Collet Washer for Welding Collets
BR UWBR22C38K 3/8" UW Collet Kit w/O-ring & Washers
BR UWBR22C14K 1/4" UW Collet Kit w/O-ring & Washers
BR UWBR22C516K 5/16" UW Collet Kit w/O-ring & Washers
BR UWBR22C18K 1/8" UW Collet Kit w/O-ring & Washers
BR UWBR22C532K 5/32" UW Collet Kit w/O-ring & Washers
BR UWBR22C316K 3/16" UW Collet Kit w/O-ring & Washers

The Broco BR-22 Plus Cutting Torch features21 design improvements, including the removal of all rubber from direct oxygen pathway, a PTFE lined fiberglass reinforced coupler hose, improved flash arrestor with higher oxygen flow rate and better flash back protection, non-return valve to prevent back flow, and improved collet and collet washer design.

Broco's Engineering Technology Group dedicated two years to the design and development of the new torch with diver safety as its top priority. As with the original BR-22, it is also ergonomically designed for diver comfort, and is made with quality materials to deliver years of trouble-free performance at low cost. All Broco rods and electrodes used with the BR-22 also can be used with the new BR-22 Plus.

Features
  • Redesigned collet provides tighter hold on the cutting rod. Redesigned collet washer removes rubber from the oxygen stream and extends washer life.
  • Ceramic washer provides noncombustible electrical isolation.
  • PTFE lined fiberglass reinforced hose withstands extremely high operating temperatures and is combustion resistant.
  • The internal gasket reduces electrolysis, insulates the diver’s hand from electrical current, and reduces potential for gas pockets in the torch.
  • Sintered element slag arrestor withstands more heat and sparks and increases oxygen flow rate.
  • Non-return valve stops the flow of hot gases in the event of a flash back.
  • Valve lever and valve stem have been redesigned to allow manual return should the valve stem get stuck.
  • Redesigned valve to better meter flow.